Sun, Feb 20, 2022 thru Sat, Feb 26, 2022
Sun, Feb 20, 2022
Just a tiny little project to finish tonight...
Another case where my guests help me with the RR. Joe & Jack suggested I add a bit more wire through the switch. Let's try it and see if it works. |
Mon, Feb 21, 2022
Train Day!
w/Rob Fair and Jordan Osborn
6-8pm 2 hrs.
Getting our night started with some chit chat. |
Rob Fair is going to attempt to fix the Intermodal crossover tonight. Trying to glue the stock rail connector. |
Meanwhile, Jordan and I will be at Central Control Tower. A couple of things: 1.) Start learning JMRI, and 2.) Get Train Simulator up and running. |
Running into some problems. The glue is not holding the rail to the throw. |
Since I need to switch out the #6 switches for Crossover 3, Rob will take one of those and replace the broken one at the intermodal location. |
Instead of using left hand switches (which is the same as crossover #4) I'm going to switch these out for #6 right hand switches. This will allow more operations possibilities. |
Here's the replacement #6 switch installed from previous location - Crossover #3. |
This is the damaged #6 switch. See the little eye pin? It is on the far rail but not on the near rail. It broke off - cheap! |
Rob will finish the night by installing the manual ground throws. |
Another fun night.
Jordan and I learned some things on JMRI.
However, we failed to get Train Simulator up and running.
We will tackle that project another day/evening.
Tue, Feb 22, 2022
As I was at work today, Jan was cleaning up more water in the basement.
UGH!
North side of the layout
Duration: 00:00:30 sec.
South side of the layout
Duration: 00:00:30 sec.
Jan made an executive decision to remove one of the covering for each of the four tables as shown in these next photos...
Powder River Basin area |
Central Control area - main meeting place. |
East Power District |
South Power District |
Wed, Feb 23, 2022
I finished putting Mixed Freight Train 5D into CNW Proviso Yard tracks 2 & 3. |
The rear of Mixed Freight Train 5D on Track 3. |
Another view. |
And the Train Order Board - this is Train Order #3 complete. |
It took a few days to finish up this operation. It started on Friday and ended on Wednesday. Six days total. |
Now to finish the paperwork. |
Thu, Feb 24, 2022
No train activity today.
Fri, Feb 25, 2022
Finished paperwork and some work on the RR...
Getting ready to paint the ground throw guards. |
On both switches... |
Finished and also painting the positional throws red and green. |
And there's the green. |
Sat, Feb 26, 2022
No train activity today.
No comments:
Post a Comment