Sun, Oct 4, 2026 thru Sat, Oct 10, 2026
Adjusting Sensors to make sure they sit at the surface of the track.
![]() |
| Some of these sensors were too low so I brought them back up to the surface with some adjusting. |
Mon, Oct 5, 2026
![]() |
| Starting out at our make shift work station working on the circuit boards for the WeHonest gate crossing system. |
![]() |
| Next up? Unloading the coal cars at the Melrose Park Power Plant |
![]() |
| DONE! |
![]() |
| Now to move the commuter cars from the Chicago Terminal (CT) to the California Avenue Maintenance Facility's Coach Yard (CACY) |
![]() |
| Rob works the west end of the assignment. |
![]() |
| The CT has been cleared. This photo captures the station end. |
![]() |
| These next two photos cover the yard throat end. This photo shows tracks 1-4 right to left. |
![]() |
| This photo shows tracks 6-8 right to left. |
![]() |
| Finally we see four commuter consists located at the California Avenue Maintenance Facility's Coach Yard and one still getting work done at the main facility at California Avenue.. |
![]() |
| Rob and I had enough of the poor performance due to dirty track. We took the time to clean all the track in the area. |
![]() |
| Cleaning the track made a huge difference. We need to clean the locomotive wheels before our next big assignment. Rob is working on bringing the commuter cars back to Chicago Terminal. |
![]() |
| Two more consists to go and we'll call it a day. |
Tue, Oct 6, 2026
No train activity today.
Wed, Oct 7, 2026
No train activity today.
Thu, Oct 8, 2026
Checking out the sensors to see if we have any success tonight operating the gates/signals/lights.
![]() |
| I brought out Train 1A from the Terminal to test out the working Railroad Crossing System. |
![]() |
| When I turned on the power to the gates they wouldn't turn off. UGH! Now what? |
![]() |
| This session happened before supper. |
![]() |
| After supper, Jan said if I wanted to work on the train to go ahead. I did! |
![]() |
| I started to wire up the constant "ON" end of gate lights. Here I have the white (-) light wired up. |
![]() |
| The floor provided me with a workplace tonight. |
![]() |
| That took 34 minutes. From 8:01 to 8:35pm. |
Fri, Oct 9, 2026
Two sessions today.
Morning session 5:49-6:18am 29 mins.
![]() |
| This morning's session starting point. |
![]() |
| Working under the layout on the constant ON end of gate light. |
![]() |
| Connecting wires from the other side of the board. |
![]() |
| Also checking sensors and not finding them to be very responsive. |
![]() |
| Ending point of the morning session. |
Evening session 7:30-8pm 30 mins.
Sat, Oct 10, 2026
Finishing off the week...
![]() |
| Starting this session at 4:15pm. |
![]() |
| Now this is getting complicated. Trying to install and figure out how this will work. |
![]() |
| After my initial try at installation of the Servo motors to move the gates, I'm thinking I need a more sturdy wire cable. The wire I tried to use is not stiff enough. It bends too much. |
![]() |
| I had enough after 52 minutes. I'll continue this tomorrow... |
Click here
to view Weekly Update YouTube video
Duration: 03:55 min:sec
Description
What's ON Track this Week?
*Moving Commuter Cars from Chicago Terminal to California Ave Metra Maintenance Coach Yard
*Moving Commuter Cars back to Chicago Terminal
*Working on the WeHonest RR crossing gate project
*Thanks for watching and leaving your comments!

































No comments:
Post a Comment