Week 28

The week we made history. Again!

Another successful week. We also added another player. 

Check this out!

Remember:

Most recent on top.

Latest on the bottom.

Saturday, January 24, 2015

Ben Berg	Finished Work on Attaching Elevation Risers	Elevated Track Sub Construction
Curt Berg	Purchased Cork for upcoming project not yet started	Lay Mainline Cork Trackbed
Curt Berg	Finished Work on Attaching Elevation Risers	Elevated Track Sub Construction
Curt Berg	Continued taping Main Lines and Yard Track	Draw Track Plan on Pressed Wood

 Yep, that's Ben under the table.

 And that's Ben above the table.

 There's Ben beside the table.

 And then there's Ben going under the table.

 You guessed it. Under the table again getting the work done!

 Working on securing the risers.

 Up close and personal.

 We glued in the small risers and screwed in from the bottom the rest of the risers.

 Looking East at Elevation box and Proviso Yard.

 Elevation riser heading down from the Summit.

 Overall view of the elevation project from the East Power District.

The view of the Elevation Project in the North Power District.

Here's the video flyover of the overall Elevation Project

Thursday, January 22, 2015

Carlos Baez	Worked on Central Control Wiring dimmer lights	Electrical Wiring - Control Panel
Curt Berg	Helped Dean with Elevation Risers Summit section	Elevated Track Sub Construction
Dean Hatzis	Helped Curt with elevation risers summit section	Elevated Track Sub Construction
Ed Nelson	Continued work on Elevated Track Section	Elevated Track Sub Construction

South Power District looking north. 

The following video shows the South Power District Loop. 

 Northeast corner looking Southwest directly at Central Control Tower.

 Ed Nelson securing one side of one of the risers.

 Carlos Baez working on detailing the dimmer switch box.

Dean Hatzis working on the Elevation Project Summit box.

This video shows what we have so far starting at the North Power district heading to the West and then turning South.

Wednesday, January 21, 2015

Curt Berg	Helped Carlos	Pressed Wood Layout Surface
Curt Berg	Began taping track plan on surface	Draw Track Plan on Pressed Wood
Carlos Baez	Worked on Central Control Wiring dimmer lights	Electrical Wiring - Control Panel

 Some up close and personal shots of the electrical work Carlos Baez is doing.

All at the Central Control Tower.